Sika Flex RSS
Re-bedding a hatch
We were seeing dripping from the hatch above the head on our Catalina 30, so we took a closer look at the hatch above decks. We could see a void in the caulking around the hatch, so decided it was time to re-bed the hatch. Having never done this before, I called upon the expertise of Jim Knapp, of Kula Marine in Gig Harbor. Here is the list of tools you will need: screwdriver (hatches are usually screwed on with phillips head screws, but double check what you have) small hammer (ball peen hammer works well) large flat head screwdriver...
Tags
- All
- 3M
- 3m 5200
- 5200
- bilge pump
- black & decker
- Boat Maintenance
- Boat Winterization
- bracket
- Catalina 30
- customization
- Eddyline
- electricity
- hatch
- installation
- inverter
- jabsco
- kayak
- kayak safety
- kayaking
- Learning
- lp900 bilge pump
- Marine Supplies
- mounting
- paddling
- re-bed
- rule
- rule lp900
- safety
- sea kayak
- sea kayaking
- sealant
- Ship To Shore
- Sika Flex
- Winterize
- Winterize Your Boat
- xylem