inverter RSS
Installing an inverter on the Inner Hull
Concept There are several different basic composite hull structures that boats use. In the fiberglass world, there are double hulls and single hulls. Double hulls form an extra watertight barrier so that even if the outer hull is penetrated, the inner hull will be able to keep the ocean out. Single hull boats only have one layer of hull structure. Because of the different properties of these hull designs, different mounting techniques must be used for various components in the boat. There are numerous ways to mount an inverter to the inside of the hull, for my single hulled Cal 34 I decided...
Tags
- All
- 3M
- 3m 5200
- 5200
- bilge pump
- black & decker
- Boat Maintenance
- Boat Winterization
- bracket
- Catalina 30
- customization
- Eddyline
- electricity
- hatch
- installation
- inverter
- jabsco
- kayak
- kayak safety
- kayaking
- Learning
- lp900 bilge pump
- Marine Supplies
- mounting
- paddling
- re-bed
- rule
- rule lp900
- safety
- sea kayak
- sea kayaking
- sealant
- Ship To Shore
- Sika Flex
- Winterize
- Winterize Your Boat
- xylem